warden-testnet node guide

Installation

Before you start. Replace every <PLACEHOLDER> with your own value and double-check the commands against the project's official documentation. Never share your mnemonic or priv_validator_key.json, and never run the same validator key on two servers.

1. Install dependencies

sudo apt update && sudo apt upgrade -y
sudo apt install -y curl git wget htop tmux build-essential jq make lz4 gcc unzip ufw

2. Install Go

cd $HOME
VER="1.22.5"
wget "https://golang.org/dl/go$VER.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$VER.linux-amd64.tar.gz"
rm "go$VER.linux-amd64.tar.gz"
echo 'export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin' >> $HOME/.bash_profile
source $HOME/.bash_profile
go version

3. Build the binary

cd $HOME
rm -rf <REPO_DIR>
git clone <REPO>
cd <REPO_DIR>
git checkout <VERSION>
make install

# check the binary
<BINARY> version --long | grep -e version -e commit

4. Initialise the node

<BINARY> init <MONIKER> --chain-id <CHAIN_ID> --home $HOME/<HOME>
<BINARY> config set client chain-id <CHAIN_ID> --home $HOME/<HOME>
<BINARY> config set client keyring-backend file --home $HOME/<HOME>
<BINARY> config set client node tcp://localhost:<PORT>657 --home $HOME/<HOME>

5. Genesis and addrbook

wget -O $HOME/<HOME>/config/genesis.json <GENESIS_URL>
wget -O $HOME/<HOME>/config/addrbook.json <ADDRBOOK_URL>

6. Configure the node

# minimum gas price, seeds and peers
sed -i -e "s|^minimum-gas-prices *=.*|minimum-gas-prices = \"<MIN_GAS_PRICE>\"|" $HOME/<HOME>/config/app.toml
sed -i -e "s|^seeds *=.*|seeds = \"<SEEDS>\"|" $HOME/<HOME>/config/config.toml
sed -i -e "s|^persistent_peers *=.*|persistent_peers = \"<PEERS>\"|" $HOME/<HOME>/config/config.toml

# pruning (validator)
sed -i -e 's|^pruning *=.*|pruning = "custom"|' \
       -e 's|^pruning-keep-recent *=.*|pruning-keep-recent = "100"|' \
       -e 's|^pruning-keep-every *=.*|pruning-keep-every = "0"|' \
       -e 's|^pruning-interval *=.*|pruning-interval = "19"|' $HOME/<HOME>/config/app.toml

# indexer off for a validator-only node (keep "kv" if this node serves RPC/API to users)
sed -i -e 's|^indexer *=.*|indexer = "null"|' $HOME/<HOME>/config/config.toml

# prometheus metrics (bound by the port plan below, keep it firewalled)
sed -i -e 's|^prometheus *=.*|prometheus = true|' $HOME/<HOME>/config/config.toml

7. Custom ports

# every chain on the server gets its own port block (<PORT>xxx) so nodes never collide
PORT=<PORT>

sed -i.bak -e "s%:26658%:${PORT}658%g; s%:26657%:${PORT}657%g; s%:6060%:${PORT}060%g; s%:26656%:${PORT}656%g; s%:26660%:${PORT}660%g" $HOME/<HOME>/config/config.toml
sed -i.bak -e "s%:1317%:${PORT}317%g; s%:8080%:${PORT}080%g; s%:9090%:${PORT}090%g; s%:9091%:${PORT}091%g; s%:8545%:${PORT}545%g; s%:8546%:${PORT}546%g; s%:6065%:${PORT}065%g" $HOME/<HOME>/config/app.toml

# advertise the public p2p port
EXT_IP=$(curl -s https://api.ipify.org)
sed -i -e "s|^external_address *=.*|external_address = \"${EXT_IP}:${PORT}656\"|" $HOME/<HOME>/config/config.toml

# open ONLY the p2p port to the world; RPC/API/gRPC stay private
sudo ufw allow ${PORT}656/tcp comment '<BINARY> p2p'

8. Create the service

sudo tee /etc/systemd/system/<BINARY>.service > /dev/null <<EOF2
[Unit]
Description=<BINARY> node
After=network-online.target

[Service]
User=$USER
ExecStart=$(which <BINARY>) start --home $HOME/<HOME>
Restart=on-failure
RestartSec=5
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF2

sudo systemctl daemon-reload
sudo systemctl enable <BINARY>

9. Start and sync

sudo systemctl start <BINARY>
sudo journalctl -u <BINARY> -f -o cat

# in another terminal: wait until "catching_up" is false
<BINARY> status 2>&1 | jq .sync_info

10. Wallet and validator

# 1) wallet (write the mnemonic down OFFLINE; never share it)
<BINARY> keys add wallet --keyring-backend file --home $HOME/<HOME>
# or restore:  <BINARY> keys add wallet --recover

# 2) fund the wallet, then wait for the node to finish syncing (catching_up = false)

# 3) validator definition
cat > $HOME/validator.json <<EOF2
{
  "pubkey": $(<BINARY> comet show-validator --home $HOME/<HOME>),
  "amount": "1000000uward",
  "moniker": "<MONIKER>",
  "identity": "<KEYBASE_IDENTITY>",
  "website": "<WEBSITE>",
  "security": "<SECURITY_EMAIL>",
  "details": "<DETAILS>",
  "commission-rate": "0.05",
  "commission-max-rate": "0.20",
  "commission-max-change-rate": "0.01",
  "min-self-delegation": "1"
}
EOF2

# 4) create the validator
<BINARY> tx staking create-validator $HOME/validator.json \
  --from wallet \
  --chain-id <CHAIN_ID> \
  --keyring-backend file \
  --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> \
  --home $HOME/<HOME> -y

Cheat sheet

### Node
<BINARY> status 2>&1 | jq .sync_info                 # sync status
sudo journalctl -u <BINARY> -f -o cat                  # live logs
sudo systemctl restart <BINARY>                        # restart
curl -s localhost:<PORT>657/net_info | jq .result.n_peers   # peers count

### Keys and balance
<BINARY> keys list --home $HOME/<HOME>
<BINARY> q bank balances $(  <BINARY> keys show wallet -a --home $HOME/<HOME>  )

### Staking
<BINARY> tx staking delegate <VALOPER> 1000000uward --from wallet --chain-id <CHAIN_ID> --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> -y
<BINARY> tx distribution withdraw-all-rewards --from wallet --chain-id <CHAIN_ID> --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> -y
<BINARY> tx distribution withdraw-rewards <VALOPER> --commission --from wallet --chain-id <CHAIN_ID> --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> -y

### Validator
<BINARY> tx slashing unjail --from wallet --chain-id <CHAIN_ID> --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> -y
<BINARY> q staking validator <VALOPER>
<BINARY> q slashing signing-info $(<BINARY> comet show-validator --home $HOME/<HOME>)

### Governance
<BINARY> q gov proposals --status voting_period
<BINARY> tx gov vote <PROPOSAL_ID> yes --from wallet --chain-id <CHAIN_ID> --gas auto --gas-adjustment 1.5 --gas-prices <MIN_GAS_PRICE> -y